Product Code: 86TT0600USEN
Availability: In Stock
$21.16
Ex Tax: $21.16
How to Diagnose Car Problems with an OBD2:

  • Start the ignition and watch the components on the dashboard console. The light for "Check Engine" or "Service Engine Soon" should flash briefly. This indicates that the OBD2 is present and ready to diagnose problems that may exist
  • Check the dashboard console as you drive. If there are any problems, the "Check Engine" or "Service Engine Soon" light will come on and stay on. The OBD2 will alert you to problems ranging from a loose or missing gas cap to an engine misfire
  • Look for blinking lights on your dashboard console. Blinking lights indicate that there is a serious problem occurring with the engine of the vehicle. It will be safer to limit your driving until this problem has been resolved
  • Use a personal OBD2 code reader to scan for problems (see Resources below). Attach the reader to your car′s 16-pin port, which is usually located under the steering wheel. The reader will display the problem codes generated by your car′s computer, as well as the definition of the codes
  • Take your car to an auto technician if you are unable to discover the source of the problem on your own. The auto technician will use a professional OBD2 reader for a more detailed scan of your car. The mechanic will use the codes as a starting point in determining the true cause of the problem
  • Take note if the light on the console goes out before you can take the car in for service. This indicates that the problem has been resolved

How to Buy a Scanner to Access Obd-ii Data

On-board diagnostic systems, also known as Obd systems were first introduced in the 1970s and 1980s. By 1996, all cars were required to have an advanced Obd system known as the Obd-ii. Measuring the output of an Obd-ii system requires a scanner. Here are a few things to consider before purchasing an Obd-ii scanner.

  • Determine if your car is compatible with the Obd-ii scanner
  • Identify the scanner′s code-reading limitations. If you want a basic scanner, you′ll be limited to diagnosing simple engine problems. Advanced scanners diagnose a broad spectrum of problems
  • Decide if you want an Obd-ii scanner that displays a description of the code or one that requires you to look up the code in a book. If you′re willing to look up the code, the scanner will be less expensive
  • Examine the length of the cord. Some cords are too short to reach from the car cabin to the engine area. Long cords allow you to run diagnostics while looking at the engine
  • Compare a stand alone model to an Obd-ii scanner that requires a laptop. Stand alone scanners may provide less information, but are portable
  • Check the scanner′s features for an ability to turn off the check engine light
  • Note whether the scanner can be updated for future

Tips & Warnings
  • If you′re using a Mac, look to see if the Obd-ii scanner software is Mac compatible
  • Some scanners are compatible with the Palm or a Pocket PC, providing enhanced portability
Description
When it comes to find out the causes of faults, you need a device to help you. This New WIFI ELM327 OBDII INTERFACE Car Diagnostic Code Scanner Reader is a good choice for you. It supports WiFi function, which is convenient to use. This ELM327 OBDII interface can connect to port directly. It is able to detect and interpret these protocols automatically. It also provides support for high speed communications and a low power sleep mode. And it supports multiple trouble code requests generic codes, pending codes and manufacturer’s specific codes. It will be your best choice.
FEATURES
  • Works with all OBD-II compliant vehicles
  • Works on all 1996 to 2010 cars and light trucks sold in the United States, some 1994 and 1995 models are also ok
  • Software included in CD for smartphone, PC and iOS (iPhone, iPad, iTouch, Mac)
  • Clear trouble codes and turn off the MIL ("Check Engine" light)
  • Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database)
  • It is specially designed for car owners
  • Highly reliable and accurate
  • The car code reader is easy to use with one plug-in
  • You may quickly find out trouble causes (troubleshooter) of electronically controlled systems on your car
  • Support multiple trouble code, request generic codes, pending codes and manufacturer′s specific codes
  • No batteries needed-powered via detachable OBD II cable
    WI-FI OBD AUTO CHECKER is capable of communicating with vehicles which adopt following protocols:
    ISO 9141
    ISO 11898(aka. CAN)
    ISO 14230(aka. KWP2000)
    ISO 15765(aka. CAN)
    SAE J1939

Specifications
SSIDWiFi OBD
Port35000
Range50 ft (Line of sight)
AntennaInternal
Power Consumption 0.75 Watts (With Power Switch)
Wifi Standard802.11a/b/g
Operating Temperature-15 To 100 Deg Celsius
Dimensions(3.43 x 1.77 x 0.98)" / (8.7 x 4.5 x 2.5) cm(L x W x H)
Weight2.36oz / 67g
ModelELM327
ColorBlack
Materialautomotive grade plastic

                                                                          

Package Includes
  • 1 x ELM327 Interface
Extra Info

Notes:

Your vehicle may not support all above parameters. How many parameters you can get is depended on the vehicle manufacturer′s implementation.
By using this device, you can monitor your cars from PC, Mac, iPhone, iPad, to do inspection by yourself! It would save your money and time.

FAQ:

How to see if your vehicle is compliant with OBD II?
Please pop the hood and look for a sticker named "VEHICLE EMISSION CONTORL INFORMATION".
Where can I get the software?
You can log on to the apple application store to get your commercial software, such as Dynolicious.
There is a freeware in the CD-ROM comes along with the device. You can use this piece of software to config and test the WI-FI OBD AUTO CHECKER. 

There are no reviews for this product.

Write a review

Note: HTML is not translated!