Product Code: 86TT5577USEN
Availability: In Stock
Ex Tax: $45.94
How to Diagnose Car Problems with an OBD2:

  • Start the ignition and watch the components on the dashboard console. The light for "Check Engine" or "Service Engine Soon" should flash briefly. This indicates that the OBD2 is present and ready to diagnose problems that may exist.
  • Check the dashboard console as you drive. If there are any problems, the "Check Engine" or "Service Engine Soon" light will come on and stay on. The OBD2 will alert you to problems ranging from a loose or missing gas cap to an engine misfire.
  • Look for blinking lights on your dashboard console. Blinking lights indicate that there is a serious problem occurring with the engine of the vehicle. It will be safer to limit your driving until this problem has been resolved.
  • Use a personal OBD2 code reader to scan for problems (see Resources below). Attach the reader to your car′s 16-pin port, which is usually located under the steering wheel. The reader will display the problem codes generated by your car′s computer, as well as the definition of the codes.
  • Take your car to an auto technician if you are unable to discover the source of the problem on your own. The auto technician will use a professional OBD2 reader for a more detailed scan of your car. The mechanic will use the codes as a starting point in determining the true cause of the problem.
  • Take note if the light on the console goes out before you can take the car in for service. This indicates that the problem has been resolved.
How to Buy a Scanner to Access OBD-II Data:

  • Determine if your car is compatible with the OBD-II scanner.
  • Identify the scanner′s code-reading limitations. If you want a basic scanner, you′ll be limited to diagnosing simple engine problems. Advanced scanners diagnose a broad spectrum of problems.
  • Decide if you want an OBD-II scanner that displays a description of the code or one that requires you to look up the code in a book. If you′re willing to look up the code, the scanner will be less expensive.
  • Examine the length of the cord. Some cords are too short to reach from the car cabin to the engine area. Long cords allow you to run diagnostics while looking at the engine.
  • Compare a stand alone model to an OBD-II scanner that requires a laptop. Stand alone scanners may provide less information, but are portable.
  • Check the scanner′s features for an ability to turn off the check engine light.
  • Note whether the scanner can be updated for future.
Tips & Warnings:
  • If you′re using a Mac, look to see if the Obd-ii scanner software is Mac compatible.
  • Some scanners are compatible with the Palm or a Pocket PC, providing enhanced portability.
Automotive diagnostic tool is very important for routine maintenance of vehicles. You can keep your car in a good condition by using these car diagnostic tools. If there is something off with your car, the car scanner tools will help you achieve your automotive diagnosis. It supports all OBD2 CAN car proatocol, but the Australian Holden protocol is not the same as the normal protocol. The Diagnostic scanner is famous for its both easy-using and powerful function like the professional diagnostic tool for car owners.
1. Turns off check engine light (MIL)
2. Highly reliable and accurate
3. Reading freeze frame data
4. Testing I / M reading status
5. Scanning  live data
6. Rescanning data
7. Reading vehicle information
8. Stand-alone unit with no need for an additional laptop computer to operate
9. Small in size and conveniently fits in your palm
10. Performs continuous DTC scan
11. Specially designed for DIYers and car-owners
12. Safely communicates with the on-board computer
13. Comes with computer cable for updates, instruction manual and soft nylon case
14. It supports OBD2 CAN protocols
15. It can´t support Holden cars from Australia
1. Dimensions: (7.87 x 3.35 x 1.26)inch / (20 x 8.5 x 3.2)cm
2. Weight: 712 g / 25.11 oz
3. Display-Backlit LCD:128 x 64 Pixel Display
4. Operating Temperature: -0℃to 50℃/td>
5. Internal Power: -9v Cell
6. External Power:  10.0 to 15.5 Volts Provided via Vehicle Battery
7. Compatibility: It supports OBD2 CAN Protocols
Package Includes
  • 1 x U581 Memoscan VAG Can Code Reader OBD2 Car Diagnostic Tool
  • 1 x Bag
  • 1 x USB Line
a***i 02/08/2019
k***8 01/08/2019
R***t 31/07/2019
m***s 31/07/2019
Showing 1 to 4 of 4 (1 Pages)

Write a review

Note: HTML is not translated!